Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterGate Repair in La Verne, CA
Gate access control in La Verne means keypads, intercoms, and card readers wired to gates that face Santa Ana wind gusts off the San Gabriel Mountains. Most of our work here runs through two services: access control retrofits on existing automatic gates, and parts replacement or welding on gates the wind has bent, snapped, or knocked off its travel. Call (909) 764-3720 and a live person answers, 24 hours a day.
Why La Verne Homes Are Different
North La Verne’s foothill streets hold a concentration of horse properties and rural estate lots that changes the kind of gate work we see. These are not lightweight suburban gates. They’re dual-swing and heavy sliding driveway gates, often ornamental iron or tubular steel, mounted on long gravel drives. Santa Ana events funnel straight down the San Gabriels and hit these gates broadside. We regularly find hinge welds cracked from repeated wind torque, posts pulled out of plumb, and automatic operators jarred so hard their limit switches reset. The flatland neighborhoods south of Foothill Boulevard are different: 1950s through 1970s ranch homes with older wrought-iron side yard and pool gates. Those jobs are usually about rust, sagging, and worn hardware rather than wind damage. And because much of north La Verne sits in a Very High Fire Hazard Severity Zone, many automatic driveway gates carry LA County Fire Department Knox-switch requirements, which means a routine operator replacement can turn into a compliance wiring job. We handle both.
Our Main La Verne Services
These are the three services La Verne homeowners call about most often, each with its own detailed page.
Gate Repair in La Verne
Repair work in La Verne splits along the 210: hinge and weld failures on the foothill estates, rusted posts and sagging panels on the flatland ranch homes. We arrive with a written price before any tool comes out. Gate Repair in La Verne
Gate Installation in La Verne
New gates here usually mean one of two things: replacing a wind-damaged steel gate on a hillside lot, or replacing an aged wrought-iron side gate on a 1960s tract home. We measure, spec the right hardware, and install with a documented photo record. Gate Installation in La Verne
Gate Motor & Opener in La Verne
Automatic operators in the foothills get worked hard by wind and heat, and the flatland originals from the 1990s are reaching end of life. We service nine major brands rather than pushing replacements. Gate Motor & Opener in La Verne
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
BeforeAfterGate Access Control in La Verne
Access control in La Verne means giving the right people a way in without letting the wind, the hillside fire code, or an aging gate frame complicate the job. Many of our calls here are retrofits: a keypad added to an existing automatic gate, a phone-entry system for a long gravel driveway, or a Knox-switch repair after an operator swap. This is commercial-grade access hardware on residential La Verne gates, wired and documented the same way Adrian Vance has done it since 2014. If you’re researching the full scope of what we do, start with Gate Access Control.
Keypad Entry
Signs you need it
A gate that won’t open without a remote, and a remote that’s always in the wrong car.
What it costs in La Verne
Most keypad additions run $350-$900 installed, depending on whether new wire has to be pulled under a La Verne driveway.
How we do it
We mount the keypad, pull new low-voltage wire if the existing conduit is broken, program codes, and photograph the final wiring at the operator board.
Phone Entry
Signs you need it
A long driveway or a gate you can’t see from the house, so visitors need to call before you’ll open up.
What it costs in La Verne
Phone-entry systems land between $900 and $2,800 installed, more if cellular service has to be added at a foothill property with no phone line.
How we do it
We mount the call box, wire it to the gate operator, set the forwarding numbers, and test from a live cell phone before we leave.
Video Intercom
Signs you need it
A gate that opens onto a street, a long drive, or a fire-access easement where you want to see who’s calling before you press anything.
What it costs in La Verne
Video intercom systems run $1,300-$4,500 installed here, depending on camera type and whether the app connects through Wi-Fi or cellular.
How we do it
We run power and data to the gate, mount the camera and call panel, pair the indoor monitor or app, and photograph the completed wiring.
What Gate Access Control Costs in La Verne
| Item | Typical range in La Verne |
|---|---|
| Keypad entry system | $350-$900 installed |
| Phone entry system | $900-$2,800 installed |
| Video intercom system | $1,300-$4,500 installed |
Does a Knox switch have to be added when I replace a gate opener on a hillside La Verne property?
Yes, if the gate is on a driveway serving a property in the Very High Fire Hazard Severity Zone, LA County Fire requires emergency-access hardware. We restore the Knox-switch wiring as part of the operator replacement and photograph the completed connection.
Can you wire a keypad to my existing gate motor?
Almost always yes. We work on LiftMaster, FAAC, Elite, and other major brands, and most operators have an accessory input for a keypad. We’ll confirm the board terminals before quoting. Call (909) 764-3720 for a free estimate.
Gate Parts & Welding in La Verne
Parts and welding in La Verne is where wind damage shows up first. A gate that drags after a Santa Ana event usually has a bent hinge or a cracked weld somewhere in the frame. Flatland ranch homes from the 1960s and 1970s present a different pattern: rust-thinned posts, worn rollers, and sagging panels on side yard and pool gates that were installed when the house was new. We replace the part, weld the frame true, and leave photographs of exactly what was done. See the full scope at Gate Parts & Welding.
Hinge Replacement
Signs you need it
A gate that sags, drags on the ground, or won’t latch because the hinge has worn or bent.
What it costs in La Verne
Hinge replacement typically runs $150-$450 per hinge, depending on weight and whether the post needs a new plate welded on.
How we do it
We lift the gate, cut or unbolt the old hinge, weld or bolt the new one, and photograph the reset gate line before we leave.
Post Replacement
Signs you need it
A post tilted out of plumb, cracking at the base, or moving when the gate opens and closes.
What it costs in La Verne
Post replacement runs $500-$1,800 depending on depth, concrete, and whether the post carries an automatic operator arm.
How we do it
We set the new post in concrete, brace it square against the gate, then weld or bolt the hardware back on and photograph the final alignment.
Rail Repair
Signs you need it
A sliding gate that shudders, binds, or rides up because the track or rail is bent or worn.
What it costs in La Verne
Rail repair falls between $275 and $1,100 depending on rail length and whether the damaged section can be welded or must be replaced.
How we do it
We identify the bent or worn section, straighten or cut and replace it, then run the gate through a full cycle and photograph the track.
What Gate Parts & Welding Costs in La Verne
| Item | Typical range in La Verne |
|---|---|
| Hinge replacement | $150-$450 per hinge |
| Post replacement | $500-$1,800 |
| Rail repair | $275-$1,100 |
Can you weld a broken ornamental iron gate on site?
Yes. Most ornamental iron repairs on La Verne gates are done on site with mobile welding equipment. We grind, weld, and repaint the repair area so the fix blends. Call (909) 764-3720 for a free estimate.
What parts do you keep stocked for La Verne service calls?
We carry common hinges, rollers, gate wheels, and hardware for LiftMaster, FAAC, Elite, and Mighty Mule systems. If a part isn’t on the truck, we order it and return on a written schedule, never asking you to chase it down.
Brands We Service in La Verne
We service LiftMaster, FAAC, Elite, and Mighty Mule among nine automation brands, so a motor on a La Verne gate doesn’t force a replacement decision. We stock common parts locally and can usually complete the repair in one visit. See our brands for the full list.
Pricing for Gate Repair in La Verne, CA
| Service | Typical range in La Verne |
|---|---|
| Keypad entry system | $350-$900 installed |
| Phone entry system | $900-$2,800 installed |
| Video intercom system | $1,300-$4,500 installed |
| Hinge replacement | $150-$450 per hinge |
| Post replacement | $500-$1,800 |
| Rail repair | $275-$1,100 |
Foothill properties with long gravel drives and fire-code hardware requirements will push a job toward the high end of these ranges. Whatever the number, it is written down and agreed before any work starts; the price you sign is the price you pay.
Neighborhoods We Serve in La Verne
We run gate calls across all of La Verne, from the hillside horse properties north of Base Line Road down through the flatland ranch tracts around Wheeler Avenue and Damien Avenue.
- North La Verne foothills and horse properties
- Live Oak neighborhood
- Downtown La Verne
- La Verne Heights
- Heritage Park area
Most La Verne calls get a same-day response for repair work.
Service Area - Cities Near La Verne
If your gate is in a neighboring city, we cover San Dimas, CA, Claremont, CA, Montclair, CA, and Pomona, CA. The same written price and documented photo record apply anywhere we work.
Serving La Verne, CA - Our Local Coverage Area
We’re based in the La Verne area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Repair in La Verne
For repair work, most La Verne calls get same-day service. Emergency callouts for a gate stuck open or an operator that won’t respond are dispatched immediately, and a live person answers the phone 24 hours a day.
Usually not for a like-for-like repair or replacement. Adding a new automatic operator or changing gate width on a hillside property may require city approval, and fire-code hardware requirements apply in parts of north La Verne. We’ll tell you before any work starts.
Bring it to us and we’ll review it at no cost. Our pricing is written before work begins, and a second look at someone else’s numbers doesn’t obligate you to anything.
Call (909) 764-3720 for a free estimate on any gate repair, access control, or welding job in La Verne. A live person answers, and the price is always written before work starts.
What happens when you call
- 1A real person answersNo phone trees - talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What La Verne Customers Say
"Our gate was hit by a delivery truck. They came out, documented the damage properly for the insurer, and the claim went through without an argument."
- Camille R."They installed the opener and left me a diagram of the wiring and the limit settings. When I needed a second remote programmed I could do it myself."
- Nadine C."Quoted in writing, installed on the day promised, and the price did not move. The crew was licensed and the number was on the paperwork."
- Wes A.